Introduction to products:
Single Roller Internal Groove Burnishing Tools can be used for smoothening and work hardening of external and internal grooves.
- Useable for both external and internal grooves
- Are not dependent on diameters of the workpiece
Single Roller Internal Groove Burnishing Tools for External Use
|Application «internal»||from Ø 50 mm and up to 120 mm depth|
|Application «external»||from Ø 20 mm|
Please note that this information represents standard values which must be adapted to the individual cases.
|Speed||up to 100 m/min depending on the application|
|Feed rate||0.05 — 0.3 mm/rev|
|Workpiece allowance||up to 0.03 mm|
|Tool pre-load||up to 1.5 mm|
|Lubrication||emulsion or oil; filtration of the lubricant (< 40 μm) can improve the surface quality and the tool life|
|Pre-machining of workpiece||surface roughness up to 15 μm|
|Workpiece hardness||up to 45HRC|